个人简介：

董红瑞，男，工学博士，副教授，硕士生导师。围绕运载火箭贮箱、新一代大型飞机、航空发动机对轻质高强复杂构件低成本高质量成形的重大需求，以材料-结构一体化形性协同制造为方向，主要从事能场辅助热处理/成形工艺机理、轻质高强合金能场辅助成形技术、轻质高强合金智能成形技术研究、航发钛合金空心风扇叶片精密成形技术、超塑成形/扩散连接技术等研究，主持国家自然科学青年基金1项，核心参与国家科技重大专项2项和国家自然科学基金2项、重点研发计划1项，发表论文30余篇。

工作经历：

2022.01-2024.05  北京航空航天大学 博士后

2023.11-2024.04  法国国立高等艺术学院  访问学者

2024.06-至今  南京航空航天大学  副教授

教育经历：

2012.09-2016.06  南京航空航天大学 学士

2016.09-2022.01  北京航空航天大学 博士

学术成果：

部分代表性论文如下：

[1] Dong H, Li X, Li Y, et al. An experimental and modelling study of cyclic tension-compression behavior of AA7075-T6 under electrically-assisted condition[J]. Journal of Materials Processing Technology, 2022, 307: 117661.

[2] Dong H, Li X, Zhao S, et al. Accelerated and enhanced artificial ageing of 2195 Al-Li alloy by electric current[J]. Materials Science and Engineering: A, 2025: 149589.

[3] Dong H, Li X, Li Y, et al. The anomalous negative electric current sensitivity of a precipitation hardened Al alloy during electrically-assisted forming[J]. Journal of Materials Research and Technology, 2023, 24: 9356-9368.

[4] Dong H, Zhou H, Li Y, et al. Temperature-dependent electroplasticity in the Invar 36 alloy[J]. Journal of Materials Research and Technology, 2024, 29: 3842-3848.

[5] Dong H, Peng X, Wang H, et al. An anomalous compression-induced softening behavior of AA6014-T4P during cyclic loading[J]. European Journal of Mechanics-A/Solids, 2023, 98: 104864.

[6] Hongrui D, Xiaoqiang L I, Haibo W, et al. Influence of thickness and initial groove angle in M–K model on limit strain of 7B04 by considering through-thickness stress[J]. Chinese Journal of Aeronautics, 2020, 33(3): 1074-1084.

[7] Dong H R, Li X Q, Li Y, et al. A review of electrically assisted heat treatment and forming of aluminum alloy sheet[J]. The International Journal of Advanced Manufacturing Technology, 2022, 120(11): 7079-7099.

[8] Li X, Dong H, Wang H, et al. Effect of strain rate difference between inside and outside groove in MK model on prediction of forming limit curve of Ti6Al4V at elevated temperatures[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(2): 405-416.

[9] Wang Z, Dong H*, Zhou W, et al. Artificial aging behavior of SiCP/AA2009 composite by electric heating: Mechanisms and modelling[J]. Materials Science and Engineering: A, 2024, 910: 146889.

[10] Feng R, Chen M, Xie L, Dong H. Effect of elevated temperature and stress state on ductile fracture behaviors in titanium alloy: Experiments and modeling[J]. Intermetallics, 2025, 180: 108708.

[11] Xiao K, Dong H*, Yuan H. Research on effect of laser surface texturing on metal bonding properties at different laser incident angles[J]. Optics & Laser Technology, 2025, 192: 113695.

[12] Fan H, Dong H**, Li X, et al. Microstructure evolution and mechanical behavior of Ti-43.5 Al-4Nb-1Mo-0.1 B alloy joints produced by linear friction welding[J]. Materials Characterization, 2025: 115880.

[13] Wu T, Gao Z, Chen M, Dong H*,et al. Data-driven time series analysis for high-temperature deformation behavior prediction based on the deep learning approach: a case study on titanium alloy[J]. Journal of Alloys and Compounds, 2025: 182233.

[14] Zhang Z, Li X, Wang C, Dong H*, et al. Electrically-assisted solidification of pure aluminum: Experiment and mechanism[J]. Journal of Materials Processing Technology, 2025, 339: 118827.

[15] Zhang Z, Li X*, Wang C, Dong H*, et al. Understanding and modelling of non-monotonic strength evolution during electrically-assisted solidification of Al–7.5 Si alloy. Journal of Manufacturing Processes, 2026, 174, 280-299.

科研项目:

承担/参与的部分项目列表如下：

[1] 国际科技重大专项，航空发动机空心叶片XXX验证，210 万元，2024.10-2027.09，在研，主持。

[2] 国际科技重大专项，大吨位高性能XXX入线验证，200 万元，2024.10-2027.09，在研，主持。

[3] 国家自然科学基金青年基金，可重复运载火箭T8态铝锂合金框环构件电辅助拉弯塑性变形宏微观机理及形性调控，30 万元，2023.01-2025.12，结题，主持。

指导学生情况:

研究工作侧重于轻质高强合金智能成形技术、能场辅助热处理/成形机理与工艺研究、航发钛合金空心风扇叶片精密成形技术、钛合金超塑成形/扩散连接研究等研究方向，每年招收1名硕士研究生，非常欢迎对上述方向感兴趣的同学们报考！